Product Introduction
Product Introduction
Unlike traditional anti-slip coatings that require anti-slip particles, Blocksil anti-slip coating requires no particles. Coefficient of Friction (COF) exceeds 0.7 when wet. Smooth, glossy surface that does not trap dirt. Next-generation technology.
No anti-slip particles required. Smooth surface that does not trap dirt. Excellent anti-slip performance with COF exceeding 0.7 when wet. Long-lasting durability.
Glossy smooth surface after application. Stain-resistant, UV-resistant. No yellowing, peeling or cracking.
Easy application. Simple tools only, no power tools required.
Other Benefits
1. Very low odour, VOC 105g/litre, eco-friendly.
2. Easy maintenance. Simply apply a new coat after cleaning for a fresh look. No need to remove old coating.
3. Easy removal without damaging tiles: Use household wax remover to remove old coating.
Applicable Surfaces
Suitable for metal, wood, vinyl flooring, stone, polished tiles, ceramic tiles, terrazzo and other common floor materials.
Application Guide
1. Clean the floor of dust, stains, oil, wax etc. Wipe dry or air dry.
2. Apply Blocksil anti-slip coating evenly in thin layers. Apply 4 layers in total, allowing each to dry before the next.
3. If using Blocksil AA system, sprinkle anti-slip particles immediately after first layer, then apply 4-5 more layers when dry.
Case Studies
Test Reports
Catalog Download
Price
Q&A
Basically none.
1. Anti-slip lifespan depends on usage frequency and cleaning.
2. Without effective cleaning, accumulated dirt reduces friction.
3. Use electrolytic cleaners for deeper cleaning.
4. Detergent, dish soap or high-alkali cleaners leave residue that increases slipperiness. Avoid long-term use without thorough rinsing.
5. Never use corrosive cleaners: sulfuric acid, hydrochloric acid, hydrofluoric acid, toilet cleaner, bleach, etc. 6. Rinse with water after using cleaner/degreaser.
7. For kitchens, canteens: degrease daily. Oily surfaces are very dangerous.
8. Mops spread oil and can re-contaminate. Use a brush until oil is dissolved and removed; avoid cotton/fibre mops.
9. We offer maintenance products that preserve anti-slip effect and clean.